Digisol DG-FS4528P, Management Manual, Page: 431 / 973

C
HAPTER
20 | Using the Command Line Interface
CLI Command Groups
– 431 –
O
UTPUT
M
ODIFIERS AND
R
EDIRECTION
Many of the show commands include options for output modifiers. For
example, the “show ip interface” command includes the following keyword
options:
Console#show ip interface ?
| Output modifiers
<cr>
Console#show ip interface
The output modifiers include options which indicate a string that occurs at
the beginning of a line, in lines that are to be excluded, or in lines that are
to be included.
Console#show ip interface | ?
begin Begin with the line that matches
exclude Exclude lines that match
include Include lines that match
Console#show ip interface |
Note: The output modifier begin can only be used as the first modifier if
more than one modifier is used in a command.
CLI C
OMMAND
G
ROUPS
The system commands can be broken down into the functional groups
shown below
.
Table 34: Command Group Index
Command Group Description Page
General Basic commands for entering privileged access mode,
restarting the system, or quitting the CLI
434
System Management Display and setting of system information, basic modes
of operation, maximum frame size, file management,
console port and telnet settings, system logs, SMTP
alerts, system clock, switch clustering, and UPnP
442
Simple Network
Management Protocol
Activates authentication failure traps; configures
community access strings, and trap receivers
516
Flow Sampling Samples traffic flows, and forwards data to designated
collector
535
Authentication Configures user names and passwords, logon access
using local or remote authentication (including AAA),
management access through the web server, Telnet
server and Secure Shell; as well as port security, IEEE
802.1X port access control, restricted access based on
specified IP addresses, and PPPoE Intermediate Agent
542