Digisol DG-FS4528P, Management Manual

Page: 165 / 973

C
HAPTER
7 | Security Measures
AAA Authorization and Accounting
– 165 –
Figure 54: Configuring AAA Server Groups
C
ONFIGURING
AAA
A
CCOUNTING
S
ETTINGS
Use the Security > AAA > Accounting > Settings page to enable accounting
of requested services for billing or security purposes.
CLI R
EFERENCES
"AAA" on page 555
C
OMMAND
U
SAGE
AAA authentication through a RADIUS or server must be enabled
before accounting is enabled.
P
ARAMETERS
These parameters are displayed:
Method Name – Specifies an accounting method for service requests.
The “default” methods are used for a requested service if no other
methods have been defined. (Range: 1-255 characters)
Note that the method name is only used to describe the accounting
method configured on the specified RADIUS or servers. No
information is sent to the servers about the method to use.
Service Request – Specifies the service as:
802.1X – Accounting for end users.
Exec – Administrative accounting for local console, Telnet, or SSH
connections.
Commands – Administrative accounting to apply to commands
entered at specific CLI privilege levels.
Accounting Notice – Records user activity from log-in to log-off point.
Group Name - Specifies the accounting server group. (Range: 1-255
characters)
The group names “radius” and “” specifies all configured
RADIUS and hosts (see "Configuring Local/Remote Logon
Authentication" ). Any other group name refers to a server group
configured on the RADIUS or Group Settings pages.