Digisol DG-FS4528P, Management Manual

Page: 125 / 973

C
HAPTER
4 | Basic Management Tasks
UPnP
– 125 –
If a device has a URL for presentation, then the control point can retrieve a
page from this URL, load the page into a web browser, and depending on
the capabilities of the page, allow a user to control the device and/or view
device status.
Using UPnP under Windows XP – To access or manage the switch with the
aid of UPnP under Windows XP, open My Network Places in the Explore file
manager. An entry for “DG-FS4528PDG-FS4528P” will appear in the list of
discovered devices. Double-click on this entry to access the switch’s web
management interface. Or right-click on the entry and select “Properties”
to display a list of device attributes advertised through UPnP.
Figure 30: Displaying UPnP Devices in Windows XP
UP
N
P
C
ONFIGURATION
Use the UPnP > Configuration page to enable or disable UPnP, and to set
advertisement and time out values.
CLI R
EFERENCES
"UPnP" on page 512
P
ARAMETERS
The following parameters are displayed in the web interface:
UPnP Status – Enables/disables UPnP on the device.
(Default: Disabled)
Advertising Duration – This sets the duration of which a device will
advertise its status to the control point. (Range: 60-86400 seconds;
Default: 100 seconds)
TTL Value – Sets the time-to-live (TTL) value for UPnP messages
transmitted by the device. (Range: 1-255; Default: 4)