Digisol DG-CD1020HC User Manual Download

Page: 12 / 79

DVR User Manual

3 Basic operation

Note: The button in gray display indicates no support.

3-1 Turn on

Plug the power cord and turn ON the power supply switch. Power supply indicator light indicates

turning on the video recorder. After the startup you will hear a beep. The default setting of video

output is multiple-window output mode. If the startup time is within the video setting time, the

timing video recording function will start up automatically. Then the video indicator light of

corresponding channel is ON and the DVR is working normally.

Note: 1. Make sure that the input voltage corresponds with the switch of the DVR power supply.

2. Power supply demands: 220V±10% /50Hz.

We suggest using the UPS to protect the power supply under allowable conditions.

3-2 Turn off

There are two methods to turn off the DVR. Entering [main menu] and choosing [turn off] in the

[turn off the system] option is called soft switch. Pressing the power supply switch is called hard

switch.

Illumination:

1. Auto resume after power failure

If the DVR is shut down abnormally, it can automatically backup video and resume previous

working status after power failure.

2. Replace the hard disk

Before replacing the hard disk, the power supply switch in the rear panel must be turned off.

Summary of Contents for DG-CD1020HC
















































































Search results

Summary of Contents for DG-CD1020HC

Reviews:

Related manuals for DG-CD1020HC

Brands by name

Popular brands

Digisol DG-CD1020HC, User Manual

Search results

Summary of Contents for DG-CD1020HC

Reviews:

Related manuals for DG-CD1020HC

Brands by name

Popular brands