1300 Henley Court
Pullman, WA 99163
509.334.6306
www.digilentinc.com
PmodSSD
™ Reference Manual
Revised May 24, 2016
This manual applies to the PmodSSD rev. A
DOC#: 502-126
Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
Page 1 of 2
Overview
The PmodSSD is a two-digit seven-segment display. Users can toggle through GPIO signals which digit is currently
on at a rate of 50Hz or greater to achieve persistence-of-vision to give the effect of both digits being lit up
simultaneously.
1
Functional Description
The PmodSSD utilizes a common cathode configuration to display a variety of
LED
segment combinations. The ten
segment combinations corresponding to digits 0 - 9 are generally the most useful, although other custom
combinations can also be created.
2
Interfacing with the Pmod
The PmodSSD communicates with the host board via the
GPIO protocol. A logic level high signal on a particular
anode will light up that respective segment on whichever digit is currently enabled. Users are able to select a
particular digit by driving the Digit Selection pin (C) to a logic high or low voltage.
The PmodSSD.
Two-digit high brightness seven-segment
display
Easily view a counter or timer
Common Cathode configuration
Small PCB size for flexible designs 1.0“ ×
1.7” (2.5 cm × 4.3 cm)
Two 6-pin Pmod connectors
with GPIO interfaces
Follows
Digilent Pmod Interface
Specification
Type 1
Features include:
