OpenLogger™ Acrylic Case Assembly Manual
Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
Page
10
of
12
Figure 14:Stacked Assemblies
Step 6
Lift one corner of the case so that you can place a finger under the screw head as shown in Figure 15. Pick up a nut
with your other hand to hand tighten the nut onto the screw as shown in Figure 16. Repeat for the other three
screws continuing to only hand tighten them. Use the edge of the table technique as shown in Figure 6 to gain
access to the screw head if needed.
Figure 15:Secure Screw with Finger
