Digigram VX820e, User Manual

Page: 11 / 34

VX820HR,
​ ​​ ​
VX822HR,
​ ​
VX820e,
​ ​
&
​ ​
VX822e
User
​ ​
Manual
HARDWARE
​ ​
INSTALLATION
Due to the reduced length of the PCI EXPRESS
​
TM
​
bus connector and the
resulting lack of mechanical stability, we strongly advise against transporting
the PCI EXPRESS
​
TM
card(s) installed in a computer, unless its chassis or case
provides a dedicated support to keep the card securely in place in order to
avoid
​ ​
physical
​ ​
damage.
The ​ ​ card ​ ​ has ​ ​ to ​ ​ be ​ ​ installed ​ ​ in ​ ​ the ​ ​ computer ​ ​ prior ​ ​ to ​ ​ installing ​ ​ its ​ ​ driver.
Installing
​ ​
the
​ ​
card
Gently plug the card in a free PCI slot and press it down to position it
firmly. ​ ​ Tighten ​ ​ the ​ ​ screw.
Interrupt
​ ​
and
​ ​
memory
​ ​
address
Hardware interrupt and addresses are automatically set up at start-up
by
​ ​
the
​ ​
PCI
​ ​
PnP
​ ​
BIOS.
SOFTWARE
​ ​
INSTALLATION
Note: the installation of the software requires administrator rights
on
​ ​
your
​ ​
computer
Please visit the Digigram web site at ​ www.digigram.com ​ for the most
recent ​ ​ driver.
In case you run a specific application developed or installed by a
Digigram Partner, this application might require the use of a specific
driver version. In this case, make sure that the updated driver has
been ​ ​ approved ​ ​ by ​ ​ your ​ ​ supplier.
Important note
​
: this default procedure installs the ‘Digigram Hardware
Settings’ control panel. This application allows the configuration of the
11