Digiever DS-1105 Pro+ User Manual Download Page 129

Page: 129 / 347

121

1.1.1

Anonymous login

Anonymous login allows users to login without username and password.

Anonymous user can only view live monitoring and playback page on local monitor;

however, the configuration page will be disable. While anonymous login is applied,

system will automatically log in without authorization process after boot up.

Start to setup the anonymous login

Please go to “Configuration->Management->Users Management->Advance

Settings”

Check the “Enable Anonymous Access.”

Enable the “Anonymous” at the local display login page, and then log in.

Summary of Contents for DS-1105 Pro+



























































































































































































































































































































































Search results

Summary of Contents for DS-1105 Pro+

Reviews:

Related manuals for DS-1105 Pro+

Brands by name

Popular brands

Digiever DS-1105 Pro+, User Manual

Search results

Summary of Contents for DS-1105 Pro+

Reviews:

Related manuals for DS-1105 Pro+

Brands by name

Popular brands