manualshive.com logo in svg

DigiDesign Synchronic, Manual

Share
Download
DigiDesign Synchronic Manual Download Page 39

Chapter 4: Synchronic Parameters

35

Playback Presets

Twelve Playback presets let you recall stored ef-
fects. Selecting a preset recalls the last edited set 
of parameters for the preset. Effect presets let 
you invoke different effects in rapid succession, 
to create a compelling musical performance. 

Effect User Knobs (FX1 and FX2)

The Effect module provides two assignable User 
Knob controls (FX1 and FX2) that provide direct 
control over any of the Effect modules Edit 
mode settings. The current control assignment 
is displayed below each User Knob.

Effect Edit Mode

In Edit mode, the Effect module provides easy 
access to the Gain, Noise, Filter, and Delay ef-
fects and their parameters. 

Enabling an Effect

Enabling an effect processes the sound (A/B 
Sounds) coming from the Playback module. Dis-
abling an effect essentially bypasses the effect.

To enable or disable the Gain, Noise, Filter, or 
Delay effect:

■

Click the Effect Enable button above the Ef-

fect Select button. The button is illuminated 
when the effect is enabled.

Selecting an Effect for Editing

To view the Gain, Noise, Filter, or Delay effect 
parameters:

■

Click the Effect Select button (Gain, Noise, Fil-

ter, or Delay). The selected effect’s button will il-
luminate, and the effect’s parameters will be 
available for editing.

Gain Effect

Gain is used to add Volume, Distortion, or Satu-
ration to the sound (A/B Sounds) coming from 
the Playback module. Similar to the Playback 
section, the Range controls set Beginning and 
End values. Range settings can also be modu-
lated by an LFO to create dynamic gain effects.

BED and END Range (–96 to 24 dB) 

Use the BEG 

and END parameters to set the amount of Gain 
effect. The specified Range settings control the 
amount of modulation by LFO1 and LFO2.

Effect module, Edit mode (Gain shown)

A/B Sound 
selectors

Performance/Edit
Mode toggle

Preset selector

Effect Enable and
Select buttons

Selected Effect
parameters

User Knob
assignments

Gain effect

Gain Enable 

Gain Select
button

LFO Waveshape
selectors

Beginning Gain
amount (in dB)
End Gain
amount (in dB)

LFO Duration
selectors

button

Gain Mode

Summary of Contents for Synchronic





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands