DigiDesign Pro Tools, Reference Manual, Page: 519 / 886

Chapter 23: Conductor Tracks and Memory Locations 505
Calculate (Advanced Option) Calculates either
the selection end time, the start tempo, or the
end tempo.
Selection Start and End Displays the start and
end points for the tempo change in the cur-
rently selected Main timebase. When an Edit se-
lection is made, the Start and End fields will dis-
play the selection boundaries. Changing start or
end values changes the selection range.
End Time (Advanced Option) Displays the abso-
lute time for the selection end. When the Main
Time Scale is set to Bars|Beats, the end time is
displayed in the Sub Time Scale. When the Main
Time Scale is set to any absolute timebase, the
end time is calculated and displayed in
Bars|Beats. Changing the end time value causes
the tempo to change.
Tempo Start and End Displays the tempo, in
beats per minute (BPM), for the start and end
points of the selected range. Changing the
tempo causes the end time value to change.
Resolution (Advanced Option) Lets you select the
BPM note value for your tempo setting.
Density (Advanced Option)
Lets you specify the
density of the tempo change events written to
the Tempo ruler.
Preserve Tempo after Selection If selected, the
previous tempo setting that was in effect at the
selection end point is preserved after the selec-
tion. If unselected, the last tempo event created
by the tempo operation continues to the end of
the session, or until the next tempo event be-
yond the selected range.
Parabolic
The Parabolic page lets you create tempos that
accelerate or decelerate by following a tempo
curve, which changes the tempo more rapidly or
less rapidly over the selection time.
Advanced When the Advanced checkbox is se-
lected, the selection range changes to the Main
Time Scale format, and additional and modified
options become available.
Calculate (Advanced Option) Calculates the se-
lection end time, the start tempo, the end
tempo, or the curvature of the tempo change.
Selection Start and End Displays the start and
end points for the tempo change in the cur-
rently selected Main timebase. When an Edit se-
lection is made, the Start and End fields will dis-
play the selection boundaries. Changing start or
end values changes the selection range.
Selecting “Follow Metronome Click” will set
the tempo BPM note value to mirror the
click value set in the meter markers.
Parabolic page (Advanced Option)