manualshive.com logo in svg

DigiDesign Mbox 2 Pro, Getting Started Manual, Page: 20 / 84

Share
Download
DigiDesign Mbox 2 Pro Getting Started Manual Download Page 20

Mbox 2 Pro Getting Started

12

DirectSound Windows System Audio Driver

The DirectSound Windows System Audio Driver 
is a multi-client, multichannel sound driver that 
allows third-party audio programs that support 
the DirectSound standard to play back and 
record through Mbox 2 Pro.

Standalone Windows Audio Drivers

Digidesign Windows Audio Drivers can be in-
stalled on Windows systems that do not have 
Pro Tools software installed. Use the standalone 
version of the Digidesign Windows Audio Driv-
ers installer (Digidesign Audio Drivers 
Setup.exe), which is available on the Pro Tools 
Installer disc.

Pro Tools Demo Session

The Pro Tools LE Installer disc includes a demo 
session that you can use to verify that your sys-
tem is working.

The demo session for Pro Tool LE is named “Fil-
tered Dreams.”

To install the demo session:

1  

Insert the Pro Tools LE Installer disc into your 

CD/DVD drive. 

2  

From your CD/DVD drive, locate and open 

the Additional Files/Pro Tools LE Demo Session 
Installer folder.

3  

Double-click Setup.exe.

4  

Select your audio drive as the install location 

and click Install.

5  

When installation is complete, click OK.

Uninstalling Pro Tools LE

If you need to uninstall Pro Tools software from 
your computer, you can use Windows com-
mands for uninstalling programs.

To uninstall Pro Tools from your computer 
(Windows Vista):

1  

Choose 

Start

 > 

Control Panel

.

2  

Under Programs, click 

“Uninstall a program.”

3  

Select 

Pro Tools.

4  

Click 

Uninstall

.

5  

Follow the on-screen instructions to remove 

Pro Tools.

To uninstall Pro Tools from your computer 
(Windows XP):

1  

Choose 

Start > Control Panel

. 

2  

Double-click 

Add or Remove Programs

.

3  

From the Currently Installed Programs list, se-

lect Digidesign Pro Tools.

4  

Click the Remove button.

5  

Follow the on-screen instructions to remove 

Pro Tools.

For detailed information on configuring the 
Digidesign DirectSound Driver, see the 
Windows Audio Drivers Guide.

For information on installing and configur-
ing the standalone version of the Digidesign 
Windows Audio Drivers, see the Windows 
Audio Drivers Guide.

Before installing the demo session to your 
audio drive, make sure the drive is config-
ured as described in “Formatting an Audio 
Drive” on page 64.

The demo session can be opened by double-
clicking the Filtered Dream.ptf file (located 
in the Filtered Dream Demo Session folder).

Summary of Contents for Mbox 2 Pro





















































































Reviews:

No comments