DigiDesign Mbox 2 Academic, Getting Started Manual

Page: 69 / 98

Chapter 9: Post Production Features 63
Selecting an Alternate
Channel for a Specific Region
You can replace a mono region (or selected por-
tion of a mono region) with a matching seg-
ment of an alternate channel that was recorded
simultaneously. Any fades performed on the
original region are automatically recalculated
against the replacement region, and any pre-ex-
isting automation on that track is unchanged.
To replace a region with a matching alternate
channel:
1
In the Timeline, make a selection that in-
cludes or overlaps the region or portion of the
region you want to replace.
2
Do one of the following:
• With any Edit tool, Right-click (Windows
or Mac) or Control-click (Mac) the selec-
tion you want to replace, then select
Matches from the pop-up menu.
– or –
• With the Selector tool, Control-click (Win-
dows) or Command-click (Mac) the selec-
tion you want to replace.
The Matches pop-up menu appears, displaying
matching alternate channels under the Chan-
nels header. (This pop-up menu also displays
any available alternate takes under the Alter-
nates header.)
3
From the Matches pop-up menu, select the
name of the alternate region that you want to
use to replace the original region.
Selecting an alternate matching channel to replace a
region
4
Repeat this procedure for every region you
want to replace on each track.
For detailed information on working with
multichannel recordings made with field re-
corders, see the Field Recorder Workflow
Guide.
Multiple QuickTime Movies on
Individual Video Tracks
You can add multiple QuickTime movies to any
individual video track. QuickTime video data
appear in the Timeline as video regions.
Multiple Video Tracks in the
Timeline
You can add multiple video tracks to the Time-
line, but only one video track can be played
back at a time. This track is known as the main
video track.
USO
RESTRITO