DigiDesign DigiRack, Manual

Page: 70 / 143

DigiRack Plug-ins Guide 64
tively low, high frequencies decay more quickly
than low frequencies, simulating the effect of air
absorption in a hall. The maximum value of this
control is Off (which effectively means bypass).
Low-Pass Filter
Low-Pass Filter controls the overall high fre-
quency content of the reverb by setting the fre-
quency above which a 6 dB per octave filter at-
tenuates the processed signal. The maximum
value of this control is Off (which effectively
means bypass).
Dynamics III
Dynamics III provides three modules:
• Compressor/Limiter
• Expander/Gate
• De-Esser
All Dynamics III modules are available in TDM,
RTAS, and AudioSuite formats.
Dynamics III supports 44.1 kHz, 48 kHz,
88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz sam-
ple rates. Compressor/Limiter and Ex-
pander/Gate modules work with mono, stereo,
and greater-than-stereo multichannel formats
up to 7.1. The De-Esser module works with
mono and stereo formats only.
In addition to standard controls in each mod-
ule, Dynamics III also provides a graph to track
the gain transfer curve in the Compressor/Lim-
iter and Expander/Gate plug-ins, and a fre-
quency graph to display which frequencies trig-
ger the De-Esser and which frequencies will be
gain reduced.
Adjusting Dynamics III Controls
You can adjust Dynamics III plug-in controls by
clicking and dragging the control’s slider or
knob, or by typing a value into the control’s text
box.
Editing Parameters Using a Mouse
You can adjust rotary controls by clicking and
dragging horizontally or vertically. Parameter
values increase as you drag upward or to the
right, and decrease as you drag downward or to
the left.
Keyboard Shortcuts
◆
For finer adjustments, Control-drag (Win-
dows) or Command-drag (Mac) the control.
◆
To return a control to its default value, Alt-
click (Windows) or Option-click (Mac) the con-
trol.
Typing Control Values
You can enter control values directly by clicking
in the corresponding text box, typing a value,
and pressing Enter (Windows) or Return (Mac).
Dragging a plug-in control
Typing a control value