DigiRack Plug-ins Guide
114
Processing Audio
Time Shift lets you change the time and pitch of
selected audio independently or concurrently.
To change the time of a selected audio region:
1
Select AudioSuite > Pitch Shift > Time Shift.
2
Select the Audio Mode appropriate to the type
of material you are processing (Monophonic,
Polyphonic, or Rhythmic).
3
In Monophonic or Polyphonic mode, select
the appropriate Range for the selected material
(Low, Mid, High, or Wide).
4
If compressing the duration of the selection,
attenuate the Gain control as necessary.
5
If using Monophonic mode, adjust the For-
mant Shift control as desired.
6
If using Polyphonic or Rhythmic mode, adjust
the Transient controls as desired.
7
Make sure Pitch Shift is set to 100% (unless
you also want to change the pitch of the selec-
tion).
8
Adjust the Time Shift control to the desired
amount of time change. Time change is mea-
sured in terms of the target duration using the
selected timebase or as a percentage of the orig-
inal.
9
Click Process.
To change the pitch of a selected audio region:
1
Select AudioSuite > Pitch Shift > Time Shift.
2
Select the Audio Mode appropriate to the type
of material you are processing (Monophonic,
Polyphonic, or Rhythmic).
3
In Monophonic or Polyphonic mode, select
the appropriate Range for the selected material
(Low, Mid, High, or Wide).
4
If transposing the pitch of the selection up, at-
tenuate the Gain control as necessary.
5
If using Monophonic mode, adjust the For-
mant Shift control as desired.
6
If using Polyphonic or Rhythmic mode, adjust
the Transient controls as desired.
7
Make sure Time Shift is set to 0% (unless you
also want to change the duration of the section).
8
Adjust the Pitch Shift control to the desired
amount of pitch change. Pitch change is mea-
sured in semitones (and cents) or as a percentage
of the original.
9
Click Process.
To change the time and pitch of a selected audio
region:
1
Select AudioSuite > Pitch Shift > Time Shift.
2
Select Varispeed from the Audio Mode pop-up
menu.
3
Adjust either the Time Shift or Pitch Shift con-
trol to match the desired amount of time and
pitch change in terms of a percentage of the
original.
4
Click Process.
Normalizing a selection before using Time
Shift may produce better results.
Using the Monophonic, Polyphonic, or
Rhythmic modes, you can adjust both the
Time Shift and Pitch Shift controls indepen-
dently before processing.
Summary of Contents for DigiRack
