DigiDesign DigiRack Page 119 Manual Download

Page: 119 / 143

Chapter 7: DigiRack AudioSuite Plug-ins

113

AudioSuite Input Modes

Time Shift supports the Pro Tools
AudioSuite Input Mode selector for use on
mono or multi-input processing.

Mono Mode

Processes each audio region as a

mono file with no phase coherency maintained
with any other simultaneously selected regions.

Multi-Input Mode

Processes up to 48 input chan-

nels and maintains phase coherency within
those selected channels.

AudioSuite Preview

Time Shift supports Pro Tools AudioSuite Pre-
view and Bypass. For more information on using
AudioSuite Preview and Bypass, see the DigiRack
Plug-ins Guide.

AudioSuite TCE Plug-in Preference

The Time Shift plug-in’s high quality time com-
pression and expansion algorithms that can be
used with the Pro Tools TCE Trim tool.

To select Time Shift for use with the TCE Trim tool:

Choose Setup > Preferences.

Click the Processing tab.

From the TC/E Plug-in pop-up menu, select

Time Shift.

Select the desired preset setting from the De-

fault Settings pop-up menu.

Click OK.

AudioSuite Input mode selector

AudioSuite Preview and Bypass are un-
available with Time Shift in Pro Tools 7.0
and 7.1.

TCE Plug-in option in Processing Preferences page

Time Shift is not available with the TCE
Trim tool in Pro Tools 7.0 and 7.1.

Refer to the Pro Tools Reference Guide for
more information about the TCE Trim tool.

Summary of Contents for DigiRack
















































































































































Search results

Summary of Contents for DigiRack

Reviews:

Related manuals for DigiRack

Brands by name

Popular brands

DigiDesign DigiRack, Manual

Search results

Summary of Contents for DigiRack

Reviews:

Related manuals for DigiRack

Brands by name

Popular brands