manualshive.com logo in svg

DigiDesign Digi 002, Getting Started

Share
Download
DigiDesign Digi 002 Getting Started Download Page 38

Getting Started with Digi 002 & Digi 002 Rack

30

Hard Drive Configuration and 
Maintenance

It is recommended that you start with a newly 
initialized audio drive. You should also periodi-
cally defragment your audio drive to ensure 
continued system performance.

If you are using an ATA/IDE or FireWire hard 
drive, initialize your drive with the utility 
named 

Disk Utility

 included with your Apple 

System software. 

Avoid Recording to System Drives

Although Pro Tools will let you record to your 
system drive, this is generally not recom-
mended. Recording and playback on system 
drives results in lower track counts and fewer 
plug-ins. You should record to system drives 
only when necessary—for example, if your com-
puter system has just one hard drive.

Removing Pro Tools on 
Mac OS X

If you need to remove Pro Tools from your com-
puter, you can use the Installer CD-ROM or the 
downloaded Installer file. 

To remove Pro Tools from your computer:

1  

Make sure you are logged in as an Administra-

tor for the account where Pro Tools is installed. 
For details on Administrator privileges in 
Mac OS X, refer to your Apple OS X documenta-
tion. 

2  

Insert the Pro Tools 6.7 Installer CD-ROM in 

your CD-ROM drive. Double-click “Install 
Pro Tools LE” or “Install Pro Tools TDM,” as ap-
propriate.

3  

Enter your Administrator password and click 

OK to authenticate the installation. 

4  

In the Installer window, choose Uninstall 

from the pop-up menu, and click Uninstall. 

5  

Follow the on-screen instructions to remove 

Pro Tools.

6  

When finished, click Quit to close the Installer 

window.

Summary of Contents for Digi 002


























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands