manualshive.com logo in svg

DigiDesign Digi 002, Getting Started

Share
Download
DigiDesign Digi 002 Getting Started Download Page 21

Chapter 2: Windows  Configuration

13

Pro Tools Demo Session

The Pro Tools LE Installer CD includes a demo 
session that you can use to verify that your sys-
tem is working.

To install the demo session:

1  

Insert the Pro Tools LE Installer CD in your 

CD-ROM drive. Locate and double-click 
Setup.exe, in D (CD-ROM drive):\Additional 
Files\Pro Tools LE Demo Session Installer. 

2  

Set the install location to your audio drive and 

click Install.

3  

When installation is complete, click OK.

MacOpener

MacOpener 6.0.5 and higher lets you mount 
HFS/HFS+ drives on a Windows-based Pro Tools 
system, as a Transfer drive.

To share Pro Tools sessions between Macintosh 
and Windows systems, select the “Enforce 
Mac/PC Compatibility” option when creating 
the session, or when saving a session copy to a 
Windows audio drive formatted using NTFS or 
FAT32.

To install and configure the MacOpener demo 
included with Pro Tools:

1  

Insert the Pro Tools Installer CD into your CD-

ROM drive. 

2  

Locate and double-click the MacOpener in-

staller file in the MacOpener Demo folder lo-
cated at D (CD-ROM drive):\Additional 
Files\MacOpener Demo Installer. Follow the on-
screen instructions to install the MacOpener. Af-
ter installation is complete, restart your com-
puter.

3  

Choose Start > Programs > MacOpener > 

MacOpener Driver Preferences.

4  

Verify that the MacOpener Driver is enabled. 

Under Driver Settings, select 
“Enable MacOpener Driver.”

5  

Under Extension Mapping, select “Do not add 

the PC extension to the Mac file name.”

6  

Click OK to quit the MacOpener Driver Pref-

erences. 

Before installing the demo session to your 
audio drive, make sure the drive is config-
ured as described in “Formatting an Audio 
Drive” on page 18.

Transfer drives can be used for storage, but 
not for playback or recording.

The MacDrive utility can be used instead of 
MacOpener. For more information about 
MacDrive, visit the Mediafour Web site 
(www.mediafour.com).

Avoid using MacOpener on HFS-formatted 
drives. It is recommended that you use Mac-
Opener on NTFS or FAT32 drives instead. 
To move material from HFS-formatted 
drives to NTFS or FAT32 drives, use the 
Save Session Copy In command in 
Pro Tools.

While SDII files can be exported or con-
verted on import, they cannot be used 
within Pro Tools sessions on Windows.

Summary of Contents for Digi 002


























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands