Chapter 6: Recording
67
Mic/Line High-Pass Filter
Digi 001 includes a high-pass filter set at 60 Hz. This filter can be useful for filtering out
low-end rumble from a noisy recording environment or microphone handling, or AC
noise.
To use the high-pass filter on analog input 1 or 2:
1
Choose Setups > Hardware, then click Other Options.
2
Enable the high-pass filter for the required inputs.
Recording an Audio Track
To record a track:
1
Record enable the desired track and assign an input to it. Set the input levels
appropriately.
2
Display the Transport window (Windows > Show Transport) and click Return to Zero to
ensure that you are starting from the beginning of the session. You can also record
according to a selection or from the cursor location in the Edit window.
3
Click Record in the Transport window to enable recording.
4
Click Play or press the Spacebar to record on all record-enabled tracks.
5
Click Stop in the Transport window or press the Spacebar when you are done recording.
Recording from the beginning of a session
click to enable recording
(turns bright red)
Return to Zero
click to record from the
beginning of session
click Play to start recording
Summary of Contents for Digi 001
Page 18: ...Digi 001 Quick Start Guide 14 ...