manualshive.com logo in svg

DigiDesign Digi 001, Quick Start Manual, Page: 67 / 82

Share
Download
DigiDesign Digi 001 Quick Start Manual Download Page 67

Chapter 6: Recording

63

chapter 6

Recording

This section explains how to record audio and MIDI tracks using Pro Tools LE.

Routing Audio to a Track

To route audio to a track:

1  

Connect your audio sources. See “Connecting Audio Sources to Digi 001” on page 32 for 

more information.

2  

Create the tracks you want to record on by choosing File > New Track.

3  

In the Edit or Mix window, find the I/O panel. You can show this panel if it is not visible 

by selecting Display > Edit Window Shows > I/O for the Edit Window, or Display > Mix 
Window Shows > I/O for the Mix Window.

4  

Click the Input button. 

5  

From the pop-up menu, select the input you are using. For example, specify Mic/Line 1 
if your audio source is plugged into analog input 1, or specify Optical 7 if you are using 
optical input 7.

Routing an input to a track

Analog inputs

Optical (ADAT) inputs

S/PDIF (RCA) inputs

Summary of Contents for Digi 001



















































































Reviews:

No comments