DigiDesign Digi 001 Page 7 Quick Start Manual Download | Manualshive

Page: 7 / 82

background image

Chapter 1: Digi 001 Introduction

3

Compatibility Information

Digidesign can only assure compatibility and provide support for devices it has tested and
approved. For a list of Digidesign-qualified computers, SCSI accelerator cards, hard drives,
diskette drives, and serial port adapters, refer to the latest compatibility information on the
Digidesign Web site (www.digidesign.com):

Digidesign Registration

Make sure to complete and return the registration card included with Digi 001. Registered
users are entitled to one year of free technical support, and will receive periodic software
updates and upgrade notices.

About the Guides

This Quick Start Guide will get you started using Digi 001 to record, edit, and mix multiple
audio and MIDI tracks. For additional information, see the following online guides:
•

Pro Tools Reference Guide

, documents in detail Pro Tools LE software

•

DigiRack Plug-Ins Guide

, documents how to use the RTAS and AudioSuite Plug-Ins

included with Pro Tools LE

•

MIDI Controllers Guide

, documents how to use MIDI control surfaces like the Mackie HUI

with Pro Tools LE

•

Keyboard Shortcuts

(Macintosh and Windows), lists keyboard shortcuts for Pro Tools LE

PDF versions of these guides are installed automatically with Pro Tools LE, and can be
easily accessed from the Help menu in Pro Tools LE. To read the guides online, or print
them, you must install Acrobat Reader (included on the Pro Tools LE Installer CD).

«
...
5
6
7
8
9
...
»

Summary of Contents for Digi 001



















































































Reviews:

No comments

Related manuals for Digi 001

Brand: Qingdao H.Y Pages: 6

Brand: Kapriol Pages: 32

Brand: Panasonic Pages: 30

Brand: Raymarine Pages: 24

Brand: Hansen Pages: 72

Brand: AAT Pages: 16

Brand: AAT Pages: 40

Platinum Series

Brand: Dairy Tech Pages: 38

Brand: H&S Pages: 34

Brand: QAL Medical Pages: 42

Brand: Jet Pages: 12

Brand: Keller Pages: 12

Brand: MacDon Pages: 49

Brand: MacDon Pages: 49

Brand: MacDon Pages: 4

Brand: XFit Pages: 16

BlackBox Series

Brand: Nakamichi Pages: 23

Brand: Harken Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands