DigiDesign Digi 001 Page 26 Quick Start Manual Download | Manualshive

Page: 26 / 82

background image

Digi 001 Quick Start Guide

22

Hard Drive Requirements

(Windows)

For audio recording and storage on the Windows 98, Pro Tools LE requires one or more
qualified ATA/IDE or SCSI drives with the following properties:
• Formatted with FAT16 or FAT32 file system (FAT32 recommended)
• Data transfer rates of 3 MB per second or faster
• Drive spin speed of 7,200 RPM or faster
• Average seek time of 10.0 milliseconds or faster

✽

For the latest compatibility information on hard drives, visit the Digidesign

Web site (www.digidesign.com).

Using System Drives for Audio

Although Pro Tools will let you record to your system drive, this is generally not
recommended. Performance for recording and playback on system hard drives is worse
than on non-system drives, resulting in lower track counts and fewer plug-ins.

You should record to system drives only when absolutely necessary—if your computer
system has just one hard drive, or if your other hard drives are completely out of space.

SCSI Hard Drives

SCSI hard drives offer several advantages over ATA/IDE drives. First, SCSI drives can be
external and therefore provide portable audio storage that is easily moved between
systems. Second, SCSI drives offer slightly better performance when recording to large
numbers of tracks; attempting to record to a large number of audio tracks with an ATA/IDE
drive will result in a short delay before recording begins.

Formatting and Defragmenting Drives

It’s recommended that you start with a newly formatted audio drive; and for optimum
performance, the drive should be formatted with the FAT32 file system. You should also
periodically

defragment

your audio drive to ensure continued system performance.

✽

You can convert hard drives formatted with FAT16 to FAT32 with the

Drive Converter

utility included with Windows 98.

«
...
24
25
26
27
28
...
»

Summary of Contents for Digi 001



















































































Reviews:

No comments

Related manuals for Digi 001

Brand: Parata Pages: 40

Brand: NEC Pages: 44

Brand: DAKO Pages: 25

Brand: 3M ESPE Pages: 50

Brand: VACGEN Pages: 13

Brand: ACCU-CHECK Pages: 104

Brand: Cannon Pages: 40

Brand: NARGESA Pages: 34

Brand: dbx Pages: 12

Brand: dbx Pages: 13

Brand: dbx Pages: 72

Brand: dbx Pages: 11

Brand: dbx Pages: 16

Brand: E-Z DRILL Pages: 12

Brand: e-survey Pages: 54

Brand: E-Pill Pages: 8

XL-7 Command Station

Brand: E-Mu Pages: 22

Brand: Xtool Pages: 51

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands