DigiDesign D-Command, Manual

Page: 74 / 136

D-Command Guide 68
Playback of Timeline Selection and Edit Selection
from the Transport
When the Timeline and Edit selections in the Edit window are
unlinked, you can set the D-Command Transport to control
playback of either the Timeline selection or the Edit selection.
To focus the D-Command Transport on the Timeline selection:
„
Press the Edit/Timeline Selection switch in the Miscella-
neous Controls section so that the Timeline LED is lit.
To focus the D-Command Transport on the Edit selection:
„
Press the Edit/Timeline Selection switch in the Miscella-
neous Controls section so that the Edit LED is lit.
Scrub/Shuttle Controls
The Scrub/Shuttle controls are used for scrubbing, scrubbing
while trimming, shuttling, and making selections.
Scrub/Shuttle Wheel
The Scrub/Shuttle wheel is used to control cursor position in
Pro Tools and for locating external machines.
Scrolling and Locating in Pro Tools Windows
To horizontally scroll the contents of the Edit window or Mix
window:
1
Focus the window you want to scroll by clicking in it or by
pressing the corresponding window key in the Window Man-
agement section.
2
Hold Alt (Windows) or Option (Mac) while turning the
Scrub/Shuttle Wheel.
To vertically scroll the contents of the Edit window or Mix
window:
1
Focus the window you want to scroll by clicking in it or by
pressing the corresponding window key in the Window Man-
agement section.
2
Hold Shift while turning the Scrub/Shuttle Wheel.
To locate the cursor in the Edit window while in Continuous Scroll
Mode:
„
Hold Alt+Start (Windows) or Op-
tion+Control (Mac) and press the Mark In or Mark Out switch
in the Audition section.
Selecting with the Scrub/Shuttle Wheel
To create selections with the Scrub/Shuttle wheel:
1
Locate the cursor in a track.
2
Press the Scrub switch or the Shuttle switch.
3
Do one of the following:
• Hold the Mark In switch and turn the Scrub/Shuttle
wheel counter-clockwise to create or extend the selection
to the left.
– or –
• Hold the Mark Out switch and turn the Scrub/Shuttle
wheel clockwise to create or extend the selection to the
right.
To scrub while adding to the front of a selection:
„
Hold Start+Shift (Windows) or C Shift (Mac) while
scrubbing the front of the selection.
To scrub while adding to the end of a selection:
„
Hold Start+Shift+Alt (Windows) or Shift+Option
(Mac) while scrubbing the end of the selection.
To scrub with fine resolution while adding to the front of a
selection:
„
Hold Start+Shift+Control (Windows) or Con-
trol+Shift+Command (Mac) while scrubbing the front of the
selection.
To scrub with fine resolution while adding to the end of a
selection:
„
Hold Start+Shift+Alt+Control (Windows) or Con-
trol+Shift+Command (Mac) while scrubbing the end
of the selection.
Continuous Zooming in the Edit Window
To horizontally zoom continuously in the Edit window:
„
Hold Control (Windows) or Command (Mac) while turning
the Scrub/Shuttle Wheel.
To vertically zoom continuously in the Edit window:
„
Hold Alt (Windows) or Option (Mac)
while turning the Scrub/Shuttle Wheel.
Scrub/Shuttle controls
Scrub
switch
Trim
switch
Shuttle
switch
Scrub/Shuttle
Wheel