manualshive.com logo in svg

DigiDesign Control 24, Manual

Share
Download
DigiDesign Control 24 Manual Download Page 125

Chapter 13: Plug-Ins and Inserts

115

Navigating Between Plug-In Targets

If you open a new plug-in from Control|24 with-
out pressing the SHIFT/ADD switch, the newly-
opened plug-in will become the new Target. The 
previous Target, if any, will replaced by the new 
Target. Use your mouse to change Target status 
of any open windows.

To open an additional plug-in window and make it 
both the plug-in Target and the controller focus:

1  

Select a plug-in on a track.

2  

Press PLUG-IN to open that plug-ins window. 

If the PLUG-IN switch is already enabled, the 
window will open automatically when you se-
lect it. 

To open an additional plug-in window and make it 
the new plug-in Target without changing a current 
controller focus:

■

Open a new plug-in window in any of the 

normal ways with the mouse or alpha-numeric 
keyboard.

To open an additional plug-in window and make it 
the controller focus but not the plug-in Target: 

■

While pressing the SHIFT/ADD switch, select 

an additional plug-in with the channel INSERT, 
EQ or DYN switches.

To change controller focus between multiple open 
windows, do one of the following:

■

Press the appropriate channel INSERT, DYN, 

or EQ switch. 

– or –

■

Click on the plug-in on-screen, using the 

mouse.

Copying and Pasting Plug-In 
Settings

Settings can be copied from one plug-in instan-
tiation and pasted into another with dedicated 
commands from Control|24.

To copy the settings from the current Target plug-
in:

■

Press COPY SETTINGS FROM CHANNEL.

To paste copied settings to the current Target 
plug-in:

1  

Select the plug-in into which you want to 

paste settings. This must be the same plug-in 
that you copied from, on a different track or in-
sert position.

2  

Press PASTE SETTING TO CHANNEL.

Opening Plug-In Windows

The PLUG-IN switch opens and closes the cur-
rent controller focus window on-screen. 

The status of the PLUG-IN switch indicates 
whether a plug-in window will open automati-
cally when accessed in parameters view: 

• If the PLUG-IN switch is lit, and there is not a 

plug-in window already open, a plug-in’s win-
dow will open when the plug-in is accessed 
from Control|24. 

• If the PLUG-IN switch is unlit, a plug-in’s win-

dow will only open if the plug-in is already in 
Parameters view when the PLUG-IN switch is 
pressed.

To open a plug-in’s window when PLUG-IN is lit:

■

Open a plug-in window in any normal way.

For more information about Pro Tools win-
dows and display options, see the 

Pro Tools 

Reference Guide

.

Summary of Contents for Control 24
































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands