1
Verify Kit Components
© 2014 Digi International, Inc. Digi, Digi International, Inc., XBee, Device Cloud, and the Digi logo are trademarks or registered trademarks of Digi International Inc. in the United States and other countries worldwide. All other trademarks are the property of their respective owners.
Quick Start Guide
XBee® ZigBee Cloud Kit
3
Connect Hardware
2
Write Down the Serial Numbers
c
Sh
ift
Power Supply for
XBee Gateway
Ethernet Cable
XBee Gateway
Et Wi-Fi Model
Required Additional Equipment
A personal computer connected to the internet.
Write down the serial number located on the back of your XBee Gateway and XBee RF module. You will use these serial numbers later when accessing
the gateway and adding the devices to Device Cloud by Etherios™. Some digits of the serial number are the same for all models and are pre-filled below.
XBee Gateway Serial Number:
00409D_____________________
Thank you for purchasing the XBee ZigBee Cloud Kit. This kit is designed to
make it easy to set up your XBee ZigBee hardware and configure the online
application. You will be able to see sensor data from your hardware kit on
a web page and send data from the web down to your device. The components in this
kit allow you to create highly customized solutions.
XBee RF module:
0013A200___________________
XBee module
Development Board
Loose Components
Battery Holder
USB Cable
Place the XBee module onto the development board, seating the pins
on the connectors noted on the diagram.
S hift
a
a
b
c
Connect XBee Module and Development Board Hardware
a
b
Connect one end of the USB cable to the development board and
the other end to your computer.
a
Connect the power supply.
b
Optional: If using an Ethernet network connection in addition to Wi-Fi, connect
one end of the Ethernet cable to your gateway and the other to a live Ethernet jack.
c
Startup Sequence
- After power is applied:
- The
Power
LED turns solid green.
- The
XBee
LED turns to blinking green if it has started a ZigBee network.
- The
Network
LED gradually turns solid green if the XBee Gateway
can connect to Device Cloud.
More on these LED states is in
LEDs and Startup States
on the next page.
Power
XBee Network
Internet router
Button
b
a
c
Optional
c
Startup Sequence
- Locate the LED labeled
Associate
on the
development board. The
Associate
LED will blink green when the
XBee module joins a ZigBee network. Later in the setup process,
you will verify that the XBee module joins the ZigBee network started
by the XBee Gateway. This step is covered in
Getting Started with Your
XBee ZigBee Cloud Kit
in the
XBee User’s Guide.
Connect XBee Gateway Hardware
0 0 1 3 A 2 0 0
x x x x x x x x
0 0 1 3 A 2 0 0
x x x x x x x x
Model: XBee Gateway
ZB
Part Number: 50X2E-Z1C-
001-01
Serial Number: 00409Dxxxxxx
Model: XBee Gateway ZB
Part Number: 50X2E-Z1C-001-01
Serial Number: 00409Dxxxxxx
Summary of Contents for XBee ZigBee
Page 3: ...0...
