Digi XBee 3 Cellular LTE-M, User Manual, Page: 10 / 331

Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide 10
Cipher suites 180
Server Name Indication (SNI) 180
Secure the connection between an XBee and Remote Manager with server authentication 180
Step 1: Get the certificate 181
Step 2: Configure device 181
Step 3: Verify that authentication is being performed 181
AT commands
Special commands 184
AC (Apply Changes) 184
FR (Force Reset) 184
RE (Restore Defaults) 184
SD (Shutdown) 185
WR (Write) 185
Cellular commands 186
PH (Phone Number) 186
S# (ICCID) 186
IM (IMEI) 186
II (Subscriber identity) 186
MN (Operator) 186
MV (Modem Firmware Version) 187
DB (Cellular Signal Strength) 187
DT (Cellular Network Time) 187
AN (Access Point Name) 188
CP (Carrier Profile) 188
BM (Bandmask) (LTE-M) 189
BN (Bandmask) (NB-IoT) 189
AM (Airplane Mode) 190
N# (Preferred Network Technology) 190
SQ (Reference Signal Received Quality) 190
SW (Reference Signal Received POWER) 191
PN (SIM PIN) 191
PK (SIM PUK) 192
CU (Cellular user name) 192
CW (Cellular password) 192
FC (Frequency Channel Number) 192
Network commands 193
IP (IP Protocol) 193
TL (TLS Protocol Version) 193
$0 (TLS Profile 0) 194
$1 (TLS Profile 1) 194
$2 (TLS Profile 2) 194
TM (IP Client Connection Timeout) 195
TS (IP Server Connection Timeout) 195
DO (Device Options) 195
DX (Requested eDRX cycle length) 196
D? (Network-provided eDRX cycle length) 197
PG (Ping) 197
Addressing commands 198
SH (Serial Number High) 198
SL (Serial Number Low) 198
MY (Module IP Address) 198
P# (Destination Phone Number) 198
N1 (DNS Address) 199