Digi XBee 3 802.15.4, User Manual

Page: 161 / 264

AT commands I/O settings commands
Digi XBee® 3 802.15.4 RF Module User Guide 161
Parameter Description
0 Disabled
1 RSSI PWM output
2
PWM0 output. M0 (PWM0 Duty Cycle) or I/O line passing control the value.
3 Digital input
4 Digital output, low
5 Digital output, high
Default
1
P1 (DIO11/PWM1 Configuration)
Sets or displays the DIO11/PWM1 configuration (Micro pin 8/SMT pin 8/TH pin 7).
When configured as PWM output ( 2 ): you can use M1 to explicitly control the PWM1 output. When used
with Analog line passing , PWM corresponds with ADC1.
Parameter range
0, 2 - 5
Parameter Description
0 Disabled
1 N/A
2
PWM1 output. M1 (PWM1 Duty Cycle) or I/O line passing control the value.
3 Digital input
4 Digital output, low
5 Digital output, high
Default
0
P2 (DIO12/TH_SPI_MISO Configuration)
Sets or displays the DIO12/TH_SPI_MISO configuration (Micro pin 5/SMT pin 5/TH pin 4).
Parameter range
SMT/MMT: 0, 3 - 5
TH: 0, 1, 3 - 5