Page | 21
2 devices should normally be present:
Device in “BUS 1, dev2, depth 1” (A USB stick is present in this example)
Device in “BUS 2, dev2, depth 1”. (This is an
Option
radio module, do not be concerned if it is
missing, the module may be mid power cycle. The text of this will vary based upon the type of
module fitted. )
If the device in BUS 1, dev2, depth 1 is not present and this same devices shows up fine in a known
working WR41V1,please request an RMA with code: “External USB port test failed”
10
CHECK SERIAL PORTS
With the PC serial port still connected to “Serial 0” of the WR41V1, launch Flashwriter again, ensure
that the correct PC comm. port number is selected and click on “Check Serial”” from the Advanced
menu of FlashWriter.
When the following prompt is received:
