Page | 20
Check that the signal strength is roughly what you normally get (+/- 10dB) with the same antenna in
the test location.
If the signal strength is much worse than normal, make a note of the cell ID (ci:BD51 in above
example) and repeat the test on a known working WR41V1 that contains the same type of radio
module in the same location. Ensure the known working WR41V1 is connected using the same
antenna and connects to the same cell ID (ci:BD51 in above example). If it does and the signal strength
is much better (+ 10dB) than the suspected bad router, request an RMA from Digi technical support
with code: “Cellular signal strength low”
9
CHECK USB PORTS
Insert a valid USB device into the USB slot on the front of the WR41V1. A valid USB device is a device
that you know works in a WR41V1 because you have tried it previously. Examples to try:
USB Flash drive
USB Serial adapter
USB Mouse
Access the CLI (Command Line Interface) and issue the “busb show” command:
