Digi TX54, User Manual

Page: 710 / 1087

Applications Digidevice module
TX54 User Guide 710
Type "help", "copyright", "credits" or "license" for more information.
>>>
3. Import the location submodule:
>>> from digidevice import location
>>>
4. Use the help command with location :
>>> help(location)
Help on module digidevice.location in digidevice:
NAME
digidevice.location - digidevice.location - API for accessing location
data
...
5. Use Ctrl-D to exit the Python session. You can also exit the session using exit() or quit() .
Use Python to set the maintenance window
The maintenance Python module allows you to set the service state of a device. When the module
sets the device to out of service, this can be used as trigger to begin maintenance activity. See
Schedule system maintenance tasks for more details.
1. Log into the TX54 command line as a user with shell access.
Depending on your device configuration, you may be presented with an Access selection
menu . Type shell to access the device shell.
2. At the shell prompt, use the python command with no parameters to enter an interactive
Python session:
# python
Python 3.6.13 (default, May
9 2021, 22:49:59)
[GCC 8.3.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>>
3. Import the maintenance module:
>>> from digidevice import maintenance
>>>
4. To determine the current service state of the device:
>>> maintenance.state()
'IN_SERVICE'
>>>