Digi TX54, User Manual

Page: 681 / 1087

Applications Show script information
TX54 User Guide 681
1. Log into the TX54 WebUI as a user with Admin access.
2. At the Status page, click Scripts .
The Scripts page displays:
3. For scripts that are currently running, click Stop Script to stop the script.

Command line
1. Log into the TX54 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu . Type admin to access the Admin CLI.
2. Determine the name of scripts that are currently running:
> show scripts
Index Label Enabled Status Run time
----- ----------- ------- ------ --------
0 script1 true active
1 script2 true idle 01:00
>
Scripts that are currently running have the status of active .
3. Stop the appropriate script:
)> system script stop script1
>
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu . Type quit to disconnect from the device.
Show script information
You can view status and statistics about location information from either the WebUI or the command
line.