Digi TX54, User Manual

Page: 29 / 1087

Digi TX54 hardware reference TX54 LEDs
TX54 User Guide 29
GNSS Service
n
Solid Green : GNSS is enabled and has a valid fix.
n Blinking Green : GNSS is enabled but does not have a valid fix.
n
Off : GNSS is not enabled.
Wi-Fi Service (single Wi-Fi models)
n
Solid Green : Wi-Fi access points or Wi-Fi clients are enabled.
n
Off : No Wi-Fi access points or Wi-Fi clients are enabled.
Wi-Fi1 Service (dual Wi-Fi models)
n
Solid Green : Wi-Fi access points or Wi-Fi clients using Wi-Fi1 radio are enabled.
n
Off : No Wi-Fi access points or Wi-Fi clients using Wi-Fi1 radio are enabled.
Wi-Fi2 Service (dual Wi-Fi models)
n
Solid Green : Wi-Fi access points or Wi-Fi clients using Wi-Fi2 radio are enabled.
n
Off : No Wi-Fi access points or Wi-Fi clients using Wi-Fi2 radio are enabled.
WWAN Signal
Indicates strength of cellular signal.
n Off : No service.
n
Yellow : Poor / Fair signal.
n
Green : Good / Excellent signal.
WWAN Service
Indicates the presence and level of cellular service running on the device.
n
Off : No service.
n
Blinking Green : 2G/3G/4G connection is coming up.
n Solid Yellow : 2G or 3G connection is up.
n
Solid Green : 4G connection is up.
Ethernet 1-4 Link and Activity (on rear panel)
The LEDs on the WAN/ETH1 , ETH2 , ETH3 , and ETH4 ports indicate that the Ethernet network
interface is up and there is activity on the network interface.