Digi TX54, User Manual

Page: 1074 / 1087

Command line interface Command line reference
TX54 User Guide 1074
Parameters
name: Display more details for a specific L2TP network server.
show l2tpeth
Show L2TPv3 ethernet tunnel session status and statistics.
Syntax
show l2tpeth [ name STRING]
Parameters
name: Display more details for a specific L2TPv3 ethernet tunnel session.
show location
Show location information.
Syntax
show location [ geofence ]
Parameters
geofence: Show geofence information.
show log
Show system log (low level).
Syntax
show log [ number INTEGER] [ filter <critical|warning|debug|info>]
Parameters
number: Number of lines to retrieve from log. (Minimum: 1, Default: 20)
filter: Filters for type of log message displayed (critical, warning, info, debug). Note, filters from the
number of messages retrieved not the whole log (this can be very time consuming). If you require
more messages of the filtered type, increase the number of messages retrieved using 'number'.
show manufacture
Show manufacturer information.
Syntax
show manufacture [ verbose ]
Parameters
verbose: Display more information (less concise, more detail).
show modbus-gateway