Digi TransPort LR54 User Manual Download Page 938

Page: 938 / 1113

System administration

Configuration files

LR54 User Guide

938

remote-path

is the location on the remote host where the file will be copied.

local-path

is the path and filename on the LR54 device.

For example:

> scp host 192.168.4.1 user admin remote /home/admin/bin/ local
/etc/config/backup-archive-0040FF800120-19.05.17-19.01.17.bin to remote

Restore the device configuration

You can restore a configuration file to your LR54 device by using a backup from the device, or a
backup from a similar device.



Web

1. Log into the LR54 WebUI as a user with Admin access.

2. On the main menu, click

System

. Under

Configuration

, click

Configuration Maintenance

The

Configuration Maintenance

windows is displayed.

3. In the

Configuration Restore

section:

a. If a passphrase was used to create the configuration backup, for

Passphrase

(save/restore)

, enter the passphrase.

b. Under

Configuration Restore

, click

Choose File

c. Browse to the system firmware file location on your local computer and select the file.

d. Click

RESTORE

4. Click

CONFIRM

The configuration will be restored and the device will be rebooted.



Command line

Summary of Contents for TransPort LR54


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TransPort LR54

Reviews:

Related manuals for TransPort LR54

Brands by name

Popular brands

Digi TransPort LR54, User Manual

Search results

Summary of Contents for TransPort LR54

Reviews:

Related manuals for TransPort LR54

Brands by name

Popular brands