User authentication
Example user configuration
LR54 User Guide
838
(config auth user adminuser)> save
Configuration saved.
>
9. Type
exit
to exit the Admin CLI.
Depending on your device configuration, you may be presented with an
Access selection
menu
. Type
quit
to disconnect from the device.
Example 2: RADIUS, , and local authentication for one user
Goal: To create a user with administrator rights who is authenticated by using all three authentication
methods.
In this example, when the user attempts to log in to the LR54 device, user authentication will occur in
the following order:
1. The user is authenticated by the RADIUS server. If the RADIUS server is unavailable,
2. The user is authenticated by the server. If both the RADIUS and servers are
unavailable,
3. The user is authenticated by the LR54 device using local authentication.
This example uses a FreeRadius 3.0 server running on ubuntu, and a server running on
ubuntu. Server configuration may vary depending on the platforms or type of servers used in your
environment.
