Firmware configuration
Change the default password for the admin user
LR54 User Guide
38
Other default configuration settings
Feature
Configuration
Central
management
n
Digi Remote Manager enabled as the central management service.
Security policies
n
Packet filtering allows all outbound traffic.
n
SSH and web administration:
l
Enabled for local administration
l
Firewall zone: Internal
Monitoring
n
Device heath metrics uploaded to Digi Remote Manager at 60 minute
interval.
n
SNMP: Disabled
Serial port
n
Enabled
n
Serial mode: Login
n
Label: None
n
Baud rate: 115000
n
Data bits: 8
n
Parity: None
n
Stop bits: 1
n
Flow control: None
Change the default password for the admin user
The unique, factory-assigned password for the default
admin
user account is printed on the bottom
label of the device and on the loose label included in the package.
If you erase the device configuration or reset the device to factory defaults, the password for the
admin
user will revert to the original, factory-assigned default password.
Note
If your device was manufactured prior to the release of firmware version 19.11.x, the default
user name may be
root
.
To change the default password for the admin user:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
Use Digi Remote Manager to view and manage your
b. Click the
Device ID
.
c. Click
Settings
.
d. Click to expand
Config
.
