Wi-Fi
Configure a Wi-Fi client and add client networks
LR54 User Guide
300
2 /network/device/eth4
3 /network/wifi/ap/digi_ap1
4 /network/wifi/ap/digi_ap2
(config network interface LAN2)>
b. Use the index number to delete
digi_ap2
:
(config network interface LAN2)> del .. .. bridge lan1 device 4
(config network interface LAN2)>
7. Save the configuration and apply the change:
(config network interface LAN2)> save
Configuration saved.
>
8. Type
exit
to exit the Admin CLI.
Depending on your device configuration, you may be presented with an
Access selection
menu
. Type
quit
to disconnect from the device.
Configure a Wi-Fi client and add client networks
Required configuration items
n
Create the Wi-Fi client.
n
The LR54W device's Wi-Fi radio that the Wi-Fi client will use.
n
SSID of the access point that the client will log into.
n
The encryption type used by the access point:
l
If a personal or mixed mode option is selected, identify the Pre-shared key.
l
If an enterprise option is selected:
o
Select the Extensible Authentication Protocol (EAP), one of:
o
TLS: Client certificate authentication.
If TLS is selected, include:
o
The username.
o
The CA certificate in PEM format.
o
The client certificate in PEM format.
o
The private key in PEM format.
o
(Optional) The private key passphrase.
o
PEAP: Username/password authentication.
If PEAP is selected, identify the username and password.
o
SCEP certificates: Simple Certificate Enrollment Protocol (SCEP) certificate
management.
If SCEP certificates is selected:
