Digi NetSilicon Connectware Connect Series, User Manual

Page: 10 / 37

Chapter 2 Quick Start Setup 11
current browser does not support the Java plug-in,
which is required to view the Java-based
configuration application.
— Sun Java Run-time Environment (JRE) 1.4.1.
Install the JRE if you need the Java plug-in.
• Advanced means that you pick components to install.
7. Follow the prompts to complete installation.
Task 3: Locate the Digi Connect product and Configure Network Settings
8. From the Windows Start Menu, choose Programs > Digi
Connect > Digi Device Discovery.
Device Discovery locates and lists Digi products on the net-
work.
9. Select your product from the list and do one of the follow-
ing:
• If a DHCP server assigned an IP address to your
product, go to the next step.
• If your product requires an IP address, choose
Configure Network Settings and assign network set-
tings.
Task 4: Access the Product from a Web Browser
10. Select the product and then choose Open Web Interface.
A browser connection is opened to the module.
Note: If you did not install the JRE and do not have it on your sys-
tem, it will be downloaded from the internet prior to the con-
figuration application opening. This can take several minutes.
11. Use the browser interface to configure the product and get
familiar with its features.