a
4
Complete the Setup Wizard
After the software installation completed, the Digi Satellite Dashboard and its Setup Wizard launched automatically.
First, the Setup Wizard will guide you through the initial discovery and setup for your Digi satellite modem.
Complete the initial discovery and setup by simply clicking after each step.
Note: The actual serial number and version number information shown on your screen may be different.
b
c
Next, after your satellite modem was successfully discovered,
the Setup Wizard will allow you to send a test message via satellite.
Enter the e-mail address of the recipient and the subject line
Select the corresponding Gateway for your region
Enter the message that you would like to send
When you are done, click to queue the message for delivery.
Note: Information shown under
Satellite Connectivity Status
will vary.
Depending on your actual geographical location, it may take some time
before a satellite moves into your area again.
Please also note that you can always check current satellite link status
by looking at the
Modem Status
window and verify expected satellite
coverage by clicking on the toolbar icon (Internet connection required).
Now the Setup Wizard will wait for a delivery notification indicating successful delivery of your satellite message.
Please note that it may take a short while for a complete message to be transmitted, even if a satellite is currently available.
After the Setup Wizard confirmed the delivery of your message, click and then .
The message will arrive in the e-mail inbox of the specified recipient. You have just sent your first message via satellite!
Note: You can also send messages
to
your satellite modem via e-mail. For North America, use the e-mail address
<
your-modem-serial#>[email protected]
, and for the rest of the world use
<your-modem-serial#>[email protected]
Your Digi m10 JumpStart Kit includes free 90-day ORBCOMM M2M satellite network service for initial evaluation and development purposes.
It requires no separate service activation, however, completing the online registration process is required to ensure uninterrupted service.
The 90-day satellite service starts after the first time you transmit or receive data using your Digi m10 satellite modem.
Please avoid excessive amounts of data transfers beyond approximately 100 messages/25 KB per month.
If you need help or have any questions, please contact the Digi technical support experts
by visiting our support web site at www.digi.com/support
1
2
1
2
3
3