Command line interface
Configuration mode
IX20 User Guide
689
4. Type
zone
to move to the
zone
node:
(config service ssh acl)> zone
(config service ssh acl zone)>
You can also enter multiple nodes at once to move multiple steps in the configuration:
(config)> service ssh acl zone
(config service ssh acl zone)>
n
Move backward one node in the configuration by entering two periods (
..
):
(config service ssh acl zone)> ..
(config service ssh acl)>
You can also move back multiples nodes in the configuration by typing multiple sets of two
periods:
(config service ssh acl zone)> .. .. ..
(config service)>
n
Move to the root of the config prompt from anywhere within the configuration by entering
three periods (
...
):
(config service ssh acl zone)> ...
(config)>
Manage elements in lists
While in configuration mode, you can use the
add
,
del
, and
move
action commands to manage
elements in a list. When working with lists, these actions require an index number to identify the list
item that will be acted on.
Add elements to a list
When used with parameters that contains lists of elements, the
add
command is used to add an
element to the list.
For example, to add an authentication method:
1. Display current authentication method by using the
show
command:
(config)> show auth method
0 local
(config)>
2. Add an authentication method by using the
add
index_item
command. For example:
n
To add the authentication method to the beginning of the list, use the index
number
0
:
(config)> add auth method 0
(config)> show auth method
0
