User authentication
Authentication groups
IX20 User Guide
482
Change the access rights for a predefined group
By default, two authentication groups are predefined:
admin
and
serial
. To change the access rights
of the predefined groups:
WebUI
1. Log into the IX20 WebUI as a user with full Admin access rights.
2. On the menu, click
System
. Under
Configuration
, click
Device Configuration
.
The
Configuration
window is displayed.
3. Click
Authentication
>
Groups
.
4. Click the authentication group to be changed, either
admin
or
serial
, to expand its
configuration node.
5. Click the box next to the following options, as appropriate, to enable or disable access rights
for each:
n
Admin access
For groups assigned Admin access, you can also determine whether the
Access level
should be
Full access
or
Read-only access
.
l
Full access
provides users of this group with the ability to manage the IX20 device
by using the WebUI or the Admin CLI.
l
Read-only access
provides users of this group with read-only access to the WebUI
and Admin CLI.
The default is
Full access
.
n
Interactive shell access
Shell access is not available if the
Allow shell
parameter has been disabled. See
for more information about the
Allow shell
parameter.
n
Serial access
