User authentication
User authentication methods
IX20 User Guide
477
(config)> add auth method end
auth_type
(config)>
where
auth_type
is one of
local
,
radius
,
, or
ldap
.
n
To add the new authentication in another location in the list, use an index value to
indicate the appropriate position. For example:
(config)> add auth method 1
auth_type
(config)>
where
auth_type
is one of
local
,
radius
,
, or
ldap
.
n
You can also use the
move
command to rearrange existing methods. See
position of authentication methods
for information about how to reorder the
authentication methods.
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
5. Type
exit
to exit the Admin CLI.
Depending on your device configuration, you may be presented with an
Access selection
menu
. Type
quit
to disconnect from the device.
Delete an authentication method
WebUI
1. Log into the IX20 WebUI as a user with full Admin access rights.
2. On the menu, click
System
. Under
Configuration
, click
Device Configuration
.
The
Configuration
window is displayed.
3. Click
Authentication
>
Methods
.
