Wi-Fi
Configure the Wi-Fi radio's channel
IX20 User Guide
167
Configure the Wi-Fi radio's channel
By default, the Wi-Fi radio is configured to automatically select the best channel to use with respect to
other Wi-Fi networks. You can configure a specific channel to use for the Wi-Fi Wi-Fi radio by using the
following steps.
Note
For the 2.4 GHz band, only channels 1 to 11 are supported; channels 12, 13, and 14 are not
supported. For the 5.0 GHz band, only non-Dynamic Frequency Selection (DFS) channels are supported.
WebUI
1. Log into the IX20 WebUI as a user with full Admin access rights.
2. On the menu, click
System
. Under
Configuration
, click
Device Configuration
.
The
Configuration
window is displayed.
3. Click
Network
>
WiFi
.
4. For
Channel
, select the channel. Only channels appropriate for the band are displayed.