Custom and default menus
Make custom menus
Digi CM User Guide
85
Add menu items
Once you have defined a menu name and added users, you can then add menu items. To add menu
items, do the following:
1 Custom Menu
>
Configuration
> Menu Name hyperlink for the menu you want to configure.
2
Choose
Menu Items
>
Add Item
.
The following screen appears.
3
Fill in the desired parameters. The parameters are:
Key
- Assign any letter or number except a value already used by another menu item.
Label
- Assign a label or name for the menu item.
Create new submenu
- Assign a name for a new submenu that this menu item will be assigned
or linked to.
Go to existing submenu
- Choose an existing submenu from the drop down menu that this
menu item will be assigned or linked to.
Connect to serial port
- Connects you to a specified port.
Connect to clustered serial port
- Connects you to a clustered port.
Telnet to a remote host
- Enter a remote host’s IP address or hostname.
SSH (Secure Shell) to a remote host
- Enter the hostname or IP address of a remote host and
the remote username.
Execute a custom command
- Enter a customized command that is any valid command on the
command line with acceptable user privileges.
4
Choose
Apply
.
5
Repeat this procedure to add more menu items.
Summary of Contents for Digi CM 16
Page 1: ...User Guide Digi CM 8 port 16 port 32 port and 48 port...
Page 63: ...Digi CM User Guide 63 User administration Administer users 64...
Page 130: ...Power Controller Cascade multiple Digi RPM units Digi CM User Guide 130...
Page 131: ...Digi CM User Guide 131 Port clustering Introduction 132 Configure port clustering 132...
