User administration
Administer users
Digi CM User Guide
64
Administer users
Required privileges
Only root and admin can administer users. The root user has unlimited administration privileges.
Admin can view and change all attributes except those that belong to the root user.
There are several ways to manage users. A user can be added, edited, or removed. Multiple users
can be managed in Groups or Access lists. The difference between Groups and Access lists are that
Groups are established in the operating system on the Digi CM unit and privileges are predefined
such as Root or Admin and are used most often for configuration. Access lists allow access to the
ports and are created by defining the privileges of the lists. Access Lists manage rights of multiple
users at the same time. Multiple users with the same rights are associated with an access list. This
allows the administrator to simplify the overall administrative process.
Procedure
1
Access the web interface.
2
Under System administration, choose Users administration. The following screen appears.
Note
The username on the Digi CM unit is case sensitive.
3
Do one of the following:
To...
Do the following...
Add a user
1. Click
Add
.
2. Fill in the attribute fields. See the table that follows for information on
attribute fields.
3. Click
Add
.
Edit a user
1. Click on the username.
2. Fill in the attribute fields. See the table that follows for information on
attribute fields.
3. Click
Submit
.
Summary of Contents for Digi CM 16
Page 1: ...User Guide Digi CM 8 port 16 port 32 port and 48 port...
Page 63: ...Digi CM User Guide 63 User administration Administer users 64...
Page 130: ...Power Controller Cascade multiple Digi RPM units Digi CM User Guide 130...
Page 131: ...Digi CM User Guide 131 Port clustering Introduction 132 Configure port clustering 132...
