Install and configure PC cards
Add a network card
Digi CM User Guide
29
ATA/IDE Fixed Disk Card configuration
Total data size to be used
- Enter the amount of memory you want to assign to the compact-
flash card for configuration files.
Delete all files in ATA/IDE Fixed Disk Card
- Select the
Delete
button to clear the compact-flash
card of all files.
Format ATA/IDE Fixed Disk Card
- The options are EXT2 or FAT formats. Select the format
option and then select the
Format
button.
5
Enter the appropriate parameters on the configuration page.
6
Click
Save to flash
or
Save & apply
.
Add a network card
To install and configure a network card on the Digi CM unit, do the following.
1
Insert the card into the PC slot.
2
Access the web interface.
3
Under the
PC card
heading, click
Configuration
.
Note
The card is automatically discovered and a configuration menu is displayed.
4
Enter the appropriate parameters in the configuration menu.
Summary of Contents for Digi CM 16
Page 1: ...User Guide Digi CM 8 port 16 port 32 port and 48 port...
Page 63: ...Digi CM User Guide 63 User administration Administer users 64...
Page 130: ...Power Controller Cascade multiple Digi RPM units Digi CM User Guide 130...
Page 131: ...Digi CM User Guide 131 Port clustering Introduction 132 Configure port clustering 132...
