Configuration menu
Authentication
Digi CM User Guide
165
Authentication
1
Access the configuration menu.
2
Choose Serial port configuration.
3
Choose an individual port number or 0 (zero) for all ports > Authentication.
4
Choose Authentication type.
5
Use the ESC key to return to the main menu.
6
Choose Save changes.
r
reboot device using power-switch
only if power management is available on
this port
p
power device on/off
(show only on or off) only if power
management is available on this port
x
close current connection to port
closes the sniff session connection
Escape
sequence
Ctrl+
Description of action
Occurrence
Summary of Contents for Digi CM 16
Page 1: ...User Guide Digi CM 8 port 16 port 32 port and 48 port...
Page 63: ...Digi CM User Guide 63 User administration Administer users 64...
Page 130: ...Power Controller Cascade multiple Digi RPM units Digi CM User Guide 130...
Page 131: ...Digi CM User Guide 131 Port clustering Introduction 132 Configure port clustering 132...
