Configuration menu
Port parameters
Digi CM User Guide
158
3
Enter the desired parameters for each menu item.
4
Use the ESC key when all parameters are entered to return to the main menu.
5
Choose Save changes.
Port parameters
1
Access the configuration menu.
2
Choose Serial Port Configuration > an individual port number or 0 (zero) for all ports.
3
Enter the desired parameters for each menu item.
4
Use the ESC key when all parameters are entered to return to the main menu.
5
Choose Save changes.
Port Access Menu
Another default menu is the Port Access Menu, which is available to all users.
1
Access Configuration menu
2
Select Serial Port Configuration.
3
Select 0 for all ports.
4
Select Port access menu configuration.
Summary of Contents for Digi CM 16
Page 1: ...User Guide Digi CM 8 port 16 port 32 port and 48 port...
Page 63: ...Digi CM User Guide 63 User administration Administer users 64...
Page 130: ...Power Controller Cascade multiple Digi RPM units Digi CM User Guide 130...
Page 131: ...Digi CM User Guide 131 Port clustering Introduction 132 Configure port clustering 132...
