Port clustering
Configure port clustering
Digi CM User Guide
135
Base destination port
- The physical port numbers of the slave device.
Note
However, you can change the base source port number to another number and the rest of
the ports on the unit will be sequentially numbered from the base source port.
Access the cluster ports
You can connect to the slave port using the web, Telnet or SSH client. You can access the port access
menu or custom menu of each slave device or connect directly to each slave port.
Web Access
1
Click
Clustering
>
Connection
> Port number.
2
Log in to the port.
3
Enter the port escape sequence (listed on page).
Telnet
1
Telnet to the IP and the port number of the device.
telnet 143.191.3.9 7101
2
Login and enter your password.
root
dbps
3
Enter the port escape sequence (listed on page).
Summary of Contents for Digi CM 16
Page 1: ...User Guide Digi CM 8 port 16 port 32 port and 48 port...
Page 63: ...Digi CM User Guide 63 User administration Administer users 64...
Page 130: ...Power Controller Cascade multiple Digi RPM units Digi CM User Guide 130...
Page 131: ...Digi CM User Guide 131 Port clustering Introduction 132 Configure port clustering 132...
