Configure virtual KVM
Use Virtual KVM with X Window System Protocol and XManager software
Digi CM User Guide
104
5
From the Virtual KVM connection drop-down list, select Enable.
Then, from the Client program drop-down list, choose the Xmanager program.
6
Click
Save & Apply
.
Connect to a system through Virtual KVM using Xmanager
When you connect through the Connection window, and a Virtual KVM connection is configured, you
now see:
▪
The terminal monitor button, which connects to the serial console
▪
A mouse button (next to the monitor icon), which connects to the Virtual KVM graphical
interface.
To connect through Virtual KVM using X Window System Protocol and XManager Software:
1
Click on the mouse icon.
2
Click OK for each of the three Java requests in pop-up windows.
The applet first checks to see if the optional Virtual KVM Assistant is installed on the system:
•
If the applet is installed, it starts Virtual KVM Assistant to manage the connection.
•
If the applet is not installed, the attempt to launch the Virtual KVM assistant will fail, and the
applet tries to launch the connection directly.
Summary of Contents for Digi CM 16
Page 1: ...User Guide Digi CM 8 port 16 port 32 port and 48 port...
Page 63: ...Digi CM User Guide 63 User administration Administer users 64...
Page 130: ...Power Controller Cascade multiple Digi RPM units Digi CM User Guide 130...
Page 131: ...Digi CM User Guide 131 Port clustering Introduction 132 Configure port clustering 132...
