Power supply
Quick Start Guide
ConnectPort
™
X2
Shift
1
Verify kit contents
© Digi International, Inc., 2009
Digi, Digi International, Digi Connect and the Digi logo are trademarks or registered trademarks of Digi International, Inc., in the United States and other countries worldwide. All other trademarks are property of their respective owners.
Software CD
a
Connect Ethernet cross-over cable to LAN connection
b
Connect Power supply
b
a
2
Connect hardware
4
Discover ZigBee
3
Discover your device
Ethernet
cross-over cable
a
b
Under Administration, Click System Information > Mesh Network
Click Discover Mesh Network. You should see the devices in the
network
Shift
a
Insert CD.
Click on the Gateway Software > ConnectPort X > Configuration >
Device Discovery.
NOTE:
You must disable
firewall and antivirus
software before running
wizard!
b
Click the device from the discovery list to access the web interface
Your device is now discovered and you are connected to it
For additional information on configuring your device for your
application, refer to the User's Guide and other documentation on
your CD
ConnectPort X2
(1P):90001082-88 A
USAT
USATCORP.COM
Contact USATCORP.COM for more
information or quantity pricing
1-888-550-8728
